Imagine having full control of your ham radio station from anywhere—using affordable hardware and open-source tools. That’s exactly what RemoteQTH delivers: a flexible, do-it-yourself remote station control system built around the Raspberry Pi and Arduino platforms, with a focus on practicality and reliability.

🛠️ What Is RemoteQTH?

RemoteQTH is an open-source project designed for amateur radio operators who want to operate their stations remotely. It allows full control of radios, antenna switches, rotators, and CW keyers via a secure web interface.

Created by hams for hams, it’s a modular platform that uses Raspberry Pi as the main controller and offers a variety of hardware add-ons to suit different station setups—from basic single-radio stations to full SO2R contesting rigs.

🔧 Key Components

• Station Server:
  A Raspberry Pi acts as the central server, running RemoteQTH’s Linux-based software. It hosts a browser-accessible interface for full station control and can function independently of the cloud.
• Antenna Switch and Band Decoder Boards:
  Relay-based boards allow remote switching of antennas or band-specific accessories. These are ideal for contest or multi-band setups.
• Arduino-Based Rotator Controller:
  Supports multiple rotor interfaces and integrates with K3NG firmware for azimuth and elevation control.
• CW Keyer Module:
  Designed with high timing precision, this keyer integrates into the RemoteQTH platform for automated or browser-controlled CW transmission.
• Audio Interface:
  Optional boards provide I/Q audio or digital audio capabilities for use with VoIP and digital modes like FT8 or RTTY.

🌐 Web-Based Control – No Apps Needed

One of the biggest advantages of RemoteQTH is that everything runs in your browser. No software installation is required on your phone, laptop, or tablet. As long as you have a modern web browser, you can control your station, change antennas, move the rotator, or send CW—whether you’re across the shack or across the world.

🆓 Open Source and Customizable

All software and hardware designs for RemoteQTH are open source. That means you can download, modify, and extend the system to suit your exact needs. Add new hardware modules, automate your routines, or integrate sensors—it’s entirely under your control.

This openness also makes RemoteQTH a great learning tool for those interested in Linux, GPIO interfacing, or web development in the context of amateur radio.

⚡ Built for Reliability & Emergency Use

Many of RemoteQTH’s features work even without internet connectivity. You can still switch antennas, move your rotator, and send CW via local Wi-Fi or even direct LAN connection. This makes it a reliable backup for emergency communications and field operations.

🚀 Why Choose RemoteQTH?

• Low Cost – Uses affordable, widely available components like Raspberry Pi and Arduino.
• Modular Design – Choose only the components you need and expand later.
• Web-Based Interface – Operate from any device with a browser.
• Open Source – Fully transparent and customizable.
• Offline Capable – Ideal for emergency or grid-down operations.
• Community Driven – Built and tested by real operators around the world.

🧰 Getting Started

1. Choose your hardware (Raspberry Pi, Arduino boards, relay modules, etc.)
2. Download the RemoteQTH server image and flash it to your Pi.
3. Configure your station setup via browser.
4. Start operating remotely—your rig is now accessible from anywhere!

🔄 Perfect for:

• Home stations in noisy RF environments
• Portable and field stations
• Club station remote access
• Emergency communication setups
• Experimenters and tinkerers

🏁 Conclusion

RemoteQTH empowers ham radio operators to take full control of their stations—remotely, reliably, and affordably. Whether you’re a weekend DXer, a serious contester, or just someone who enjoys tinkering with radio and electronics, RemoteQTH gives you the tools to operate on your terms.

Visit https://remoteqth.com