firmware update - Hamradio.my Amateur Radio, Tech Insights and Product Reviews Sat, 29 Mar 2025 16:09:58 +0000 en-US hourly 1 https://wordpress.org/?v=7.0 https://hamradio.my/wp-content/uploads/2026/02/cropped-cropped-image-removebg-preview-3-32x32.png firmware update - Hamradio.my 32 32 How to Update Your LoRa APRS Tracker Using the Web Flasher https://hamradio.my/2025/03/how-to-update-your-lora-aprs-tracker-using-the-web-flasher/ https://hamradio.my/2025/03/how-to-update-your-lora-aprs-tracker-using-the-web-flasher/#respond Sat, 29 Mar 2025 16:08:14 +0000 https://hamradio.my/?p=7311 Keeping your LoRa APRS tracker updated ensures optimal performance and access to the latest features. One of the easiest ways to update your tracker is by using the Web Flasher tool. This guide will walk you through the steps to update your device seamlessly. Prerequisites Before you begin, ensure you have the following: Step-by-Step Guide […]

The post How to Update Your LoRa APRS Tracker Using the Web Flasher appeared on Hamradio.my - Amateur Radio, Tech Insights and Product Reviews by 9M2PJU.

]]>

Keeping your LoRa APRS tracker updated ensures optimal performance and access to the latest features. One of the easiest ways to update your tracker is by using the Web Flasher tool. This guide will walk you through the steps to update your device seamlessly.

Prerequisites

Before you begin, ensure you have the following:

  • A LoRa APRS tracker with ESP32-S3, ESP32-S2, or a similar board.
  • A USB Type-C data cable (ensure it supports data transfer, not just charging).
  • A computer with a compatible web browser (Google Chrome or Microsoft Edge recommended).

Step-by-Step Guide

1. Connect Your LoRa APRS Tracker

Plug your LoRa APRS tracker into your computer using a Type-C data cable. Ensure the connection is secure.

2. Enter Flashing Mode

To put your device into flashing mode, follow these steps:

  • Hold the USER button.
  • While holding the USER button, press the RESET button once.
  • For ESP32-S3/S2 boards, press and hold USER/BOOT, then press RESET.

Your device should now be in flashing mode and ready for firmware installation.

3. Open the Web Flasher

Using your web browser, navigate to the Web Flasher tool: LoRa Tracker Web Flasher

4. Select Your Device and Firmware

Once the Web Flasher loads:

  • Choose the appropriate board type from the dropdown menu.
  • Select the firmware version you want to install.

5. Flash the Firmware

Click the Flash Firmware button and follow the on-screen instructions to complete the update process.

6. Wait for the Flashing Process to Complete

The flashing process will take a few minutes. Once completed, your LoRa APRS tracker will reboot with the latest firmware installed.

Final Steps

After flashing, disconnect and reconnect your tracker to ensure it is functioning correctly. You can now enjoy the latest updates and improvements on your LoRa APRS tracker!

For more ham radio-related content and guides, visit hamradio.my. Happy tracking!

The post How to Update Your LoRa APRS Tracker Using the Web Flasher appeared on Hamradio.my - Amateur Radio, Tech Insights and Product Reviews by 9M2PJU.

]]> https://hamradio.my/2025/03/how-to-update-your-lora-aprs-tracker-using-the-web-flasher/feed/ 0