Doppler effect
The sudden change in pitch of a car horn as a car passes by (source motion) or in the pitch of a boom box on the sidewalk as you drive by in your car (observer motion) was first explained in 1842 by Christian Doppler. His Doppler Effect is the shift in frequency and wavelength of waves which results from a source moving with respect to the medium, a receiver moving with respect to the medium, or even a moving medium.
The perceived frequency (f ´) is related to the actual frequency (f0) and the relative speeds of the source (vs), observer (vo), and the speed (v) of waves in the medium by
The choice of using the plus (+) or minus (-) sign is made according to the convention that if the source and observer are moving towards each other the perceived frequency (f ´) is higher than the actual frequency (f0). Likewise, if the source and observer are moving away from each other the perceived frequency (f ´) is lower than the actual frequency (f0). Although first discovered for sound waves, the Doppler effect holds true for all types of waves including light (and other electromagnetic waves). The Doppler effect for light waves is usually described in terms of colors rather than frequency. A red shift occurs when the source and observer are moving away from eachother, and a blue shift occurs when the source and observer are moving towards eachother. The red shift of light from remote galaxies is proof that the universe is expanding.
The animations below will illustrate this phenomena for a moving source and stationary observer.
Stationary Sound Source
The movie at left shows a stationary sound source. Sound waves are produced at a constant frequency f0, and the wavefronts propagate symmetrically away from the source at a constant speed v, which is the speed of sound in the medium. The distance between wavefronts is the wavelength. All observers will hear the same frequency, which will be equal to the actual frequency of the source. For a movie showing how circular waves can be created (in terms of particle motion and wave motion) go here. |
Source moving with vsource < vsound ( Mach 0.7 )
In the movie at left the same sound source is radiating sound waves at a constant frequency in the same medium. However, now the sound source is moving to the right with a speed vs = 0.7 v (Mach 0.7). The wavefronts are produced with the same frequency as before. However, since the source is moving, the center of each new wavefront is now slightly displaced to the right. As a result, the wavefronts begin to bunch up on the right side (in front of) and spread further apart on the left side (behind) of the source. An observer in front of the source will hear a higher frequency f ´ > f0, and an observer behind the source will hear a lower frequency f ´ < f0. |
Source moving with vsource = vsound ( Mach 1 – breaking the sound barrier )
Now the source is moving at the speed of sound in the medium (vs = v, or Mach 1). The speed of sound in air at sea level is about 340 m/s or about 750 mph. The wave fronts in front of the source are now all bunched up at the same point. As a result, an observer in front of the source will detect nothing until the source arrives. The pressure front will be quite intense (a shock wave), due to all the wave fronts adding together, and will not be perceived as a pitch but as a “thump” of sound as the pressure wall passes by. The figure at right shows a bullet traveling at Mach 1.01. You can see the shock wave front just ahead of the bullet. Jet pilots flying at Mach 1 report that there is a noticeable “wall” or “barrier” which must be penetrated before achieving supersonic speeds. This “wall” is due to the intense pressure front, and flying within this pressure front produces a very turbulent and bouncy ride. Chuck Yeager was the first person to break the sound barrier when he flew faster than the speed of sound in the X-1 rocket-powered aircraft on October 14, 1947. Check out the movie The Right Stuff for more about this significant milestone, and the beginnings of the US space project. The figure at right shows a n F-18 at the exact instant it goes supersonic. Click on the figure to see more information and a MPEG movie of this event. |
Source moving with vsource > vsound (Mach 1.4 – supersonic)
The sound source has now broken through the sound speed barrier, and is traveling at 1.4 times the speed of sound (Mach 1.4). Since the source is moving faster than the sound waves it creates, it actually leads the advancing wavefront. The sound source will pass by a stationary observer before the observer actually hears the sound it creates. As you watch the animation, notice the clear formation of the Mach cone, the angle of which depends on the ratio of source speed to sound speed. It is this intense pressure front on the Mach cone that causes the shock wave known as a sonic boom as a supersonic aircraft passes overhead. The shock wave advances at the speed of sound v, and since it is built up from all of the combined wave fronts, the sound heard by an observer will be quite intense. A supersonic aircraft usually produces two sonic booms, one from the aircraft’s nose and the other from its tail, resulting in a double thump. The figure at right shows a bullet travelling at Mach 2.45. The mach cone and shock wavefronts are very noticeable. |
Share this content:
Post Comment