Simple Open Camper (S.O.C.): Local ESP32 Touch Panel for Campervans, Solar, BMS, Heating, and Off-Grid Shacks

Running a full Home Assistant server on a Raspberry Pi or mini PC inside a campervan, overland rig, or off-grid mobile radio shack works well until you look at the overnight amp-hour draw. Keeping a Linux box, SSD, router, and wall tablet awake 24/7 just to toggle cabin lights, check your LiFePO4 battery bank, and read two propane bottles burns precious solar harvest. Simple Open Camper (S.O.C.) takes a much leaner approach: it puts the entire control panel directly onto a low-power ESP32-P4 or ESP32-S3 touchscreen, speaking MQTT, Bluetooth LE, and LIN bus natively with zero cloud and no Home Assistant required.

Simple Open Camper ESP32 started life as a frugal Zigbee light panel for an SMHUB Nano and grew step by step into a unified motorhome and off-grid dashboard. Today it talks directly to Zigbee2MQTT, Shelly, WLED, Victron Instant Readout and Cerbo GX, over a dozen Bluetooth LiFePO4 battery BMS protocols, portable power stations, Truma and Alde heating systems, diesel heaters, 12V compressor fridges, gas scales, and tank sensors. This guide covers how Simple Open Camper works, which ESP32 display hardware to choose, what protocols it supports, how it compares with Home Assistant and Victron Venus OS, and how to flash it straight from your browser.

TL;DR: Simple Open Camper (S.O.C.) is a local, no-cloud ESP32-P4 and ESP32-S3 touchscreen control panel for campers, motorhomes, and off-grid setups. It replaces a power-hungry Home Assistant server by talking directly to Zigbee2MQTT, Victron solar/Cerbo GX, Bluetooth LiFePO4 BMS units, portable power stations, Truma/Alde/diesel heaters, and gas or tank sensors. It includes a built-in drag-and-drop web editor, browser WebSerial flasher, and PolyForm Noncommercial licence for personal DIY builds.

What Simple Open Camper Is

Simple Open Camper (S.O.C.) is a standalone ESP32 firmware that turns a 7-inch 1024×600 touchscreen (or compact 1.46-inch rotary display) into a self-contained camper and off-grid control panel over MQTT, Bluetooth LE, and LIN bus, without requiring Home Assistant or any cloud service. Developed by cyclemat on GitHub using C++ with Arduino/ESP-IDF 5 and LVGL, it hosts its own drag-and-drop browser layout editor (http://<panel>/), supports German, English, Spanish, and French interfaces, and can even run in standalone Wi-Fi router mode when parked completely off-grid.

Simple Open Camper ESP32 control panel banner showing an ESP32 module, touch display with battery, water, temperature, and lights tiles, and a campervan
Simple Open Camper (S.O.C.) brings cabin lighting, battery telemetry, water levels, gas cylinders, and heating onto a single local ESP32 touchscreen. Source: cyclemat/simple-open-camper.

For amateur radio operators building overland rigs, EmComm trailers, or portable SOTA/POTA basecamp vans, the appeal is immediate: a single low-wattage wall screen monitors your 12V LiFePO4 house bank, solar yield, inverter draw, cabin temperature, and lighting without booting a Linux host or depending on cellular coverage.

Hardware Choices: ESP32-P4 vs Waveshare ESP32-S3 vs Rotary & CYD

Simple Open Camper targets two main 7-inch 1024×600 touch panels plus smaller companion displays. Choosing the right board up front matters because Bluetooth LE, Wi-Fi, MQTT, and a 1024×600 framebuffer compete hard for internal SRAM on the older ESP32-S3.

Feature Elecrow CrowPanel Advanced 7″ (EC-P4-7-V1.2) Waveshare 7″ 7B (WS-S3-7B) Elecrow CrowPanel 1.46″ Rotary (EC-S3-1.46)
Main MCU ESP32-P4 (Dual RISC-V, 400 MHz) ESP32-S3 (Dual Xtensa LX7, 240 MHz) ESP32-S3R8 (240 MHz)
Display 7″ IPS 1024×600, MIPI-DSI + DMA2D 7″ 1024×600, parallel RGB 1.46″ round 360×360 + rotary knob & LED ring
Internal RAM Free 768 KB total (~270 KB free in use) 512 KB total (~45 KB free in use) Tight (single-tile companion UI)
PSRAM / Flash 32 MB PSRAM / 16 MB Flash 8 MB Octal PSRAM / 16 MB Flash 8 MB PSRAM / 16 MB Flash
Radio Chip Separate ESP32-C6 (Wi-Fi 6 + BLE 5) Integrated on ESP32-S3 (shared RAM/antenna) Integrated on ESP32-S3
Built-in MQTT Broker Yes No (connects to external broker) Yes
Battery Voltage Sense External divider needed (2x 100k to GPIO 49) Built-in battery connector & measurement Compact USB/battery setup
Best Use Case Full camper panel with all modules enabled Budget build with selective modules only Compact bedside or single-tile rotary dial

In addition, the project supports “Cheap Yellow Display” (CYD-ESP32-2.8, ESP32-2432S028R) boards as dedicated Victron readouts, extra displays, and ESP32 satellite nodes (such as relay boards or remote BLE/LIN bridges).

The developer gives a refreshingly candid hardware warning: on the Waveshare ESP32-S3-7B, enabling the UI, Wi-Fi, Zigbee2MQTT, Cerbo GX, and Bluetooth leaves only about 45 KB of internal RAM free, and the parallel RGB display shares PSRAM bandwidth with rendering (capped at 25 Hz to avoid visual tearing). If you want to run many integrations simultaneously, the Elecrow CrowPanel Advanced 7″ (ESP32-P4) is the clear winner thanks to its 32 MB PSRAM, MIPI-DSI hardware acceleration, and dedicated ESP32-C6 radio coprocessor.

Supported Devices: Power, Solar, Gas, Water, Heating, and Lights

What makes Simple Open Camper stand out is the sheer breadth of real-world camper and off-grid protocols packed into one microcontroller firmware:

  [ Zigbee2MQTT / Shelly / WLED ] ---- MQTT / Wi-Fi ----+
  [ Victron Cerbo GX (Venus OS) ] ---- MQTT / Wi-Fi ----+
                                                        |
  [ Victron BLE / LiFePO4 BMS   ] ---- Bluetooth LE ----+---> [ Simple Open Camper ]
  [ Power Stations / Gas / Tank ] ---- Bluetooth LE ----+     (ESP32-P4 / ESP32-S3)
  [ Ruuvi / SwitchBot / BTHome  ] ---- Bluetooth LE ----+       |               |
                                                        |   1024x600 LVGL   Built-in Web
  [ Truma CP Plus / Alde 30x0   ] --- LIN Bus (UART) ---+   Touch UI        Drag & Drop Editor

Energy, Solar, and Bluetooth BMS

  • Victron Energy: Reads Victron solar charge controllers, SmartShunt battery monitors, and DC-DC chargers directly over Bluetooth (“Instant Readout”), and connects to a Victron Cerbo GX (Venus OS) over MQTT for solar yield, shore power, inverter/charger state, and DC loads.
  • Bluetooth LiFePO4 BMS (Read-Only): Supports Super B, Power Quarry/Shentec, Daly/Bulltron, JBD/Xiaoxiang, CS-BATTERIES, JK-BMS, LiTime/Redodo/PowerQueen, Renogy, Eco-Worthy, ANT, and Vatrer. Long-pressing a battery tile opens a detailed view with voltage, current, wattage, temperature, cycle count, alarms, and individual cell voltage boxes highlighting the highest and lowest cells plus delta (Δ).
  • Portable Power Stations: Monitors charge level and wattage and switches AC/DC outputs over Bluetooth on Bluetti, Allpowers, Anker SOLIX, and EcoFlow units.
Simple Open Camper dual screen preview showing onboard battery, solar power, MultiPlus inverter, booster, shore power, charger, and left and right gas cylinder tiles
Example Victron and gas telemetry tiles showing battery state of charge, solar input, MultiPlus inverter load, DC-DC booster, shore power, charger stage, and dual gas bottle levels. Source: cyclemat/simple-open-camper.
Simple Open Camper battery detail modal displaying state of charge, voltage, current, power, and temperature
Long-pressing a battery tile opens the full detail modal with state of charge, pack voltage, live current, power draw, and temperature (plus per-cell voltage boxes on supported BMS models). Source: cyclemat/simple-open-camper.

Gas Cylinders, Tanks, Heating, and Cabin Gear

  • Gas & Tank Sensors: Truma LevelControl (up to 2 cylinders over BLE), Mopeka Pro/Standard/H2O/Lippert ultrasonic sensors (up to 4), Senso4s Basic/Plus Bluetooth scales, SuperSense tank modules, and Simarine STR1/STR2/STR3 tank sensors (both open and 32-character encrypted broadcasts).
  • Heating & Cooling: Truma Combi/VarioHeat via CP Plus (LIN bus with TJA1020/TJA1021/MCP2025 transceiver) or iNet X (Bluetooth), Alde hydronic heaters (Compact 3020, 3030, 3030 Plus via LIN bus), Vevor/Hcalory/HeaterCC diesel heaters, and Alpicool/IceCube/Bodega 12V compressor fridges.
  • Lighting & Climate: Zigbee2MQTT (tested daily with 131 devices and 73 tiles, with real light colours, white tone, and brightness sliders), Shelly Gen1/Gen2+, WLED strips, Ruuvi Tag/Air and SwitchBot climate sensors, BTHome (Shelly BLU, pvvx Xiaomi sensors), plus experimental direct Zigbee via an ESP32-H2 radio module on the P4 and round panel.

Built-In Web Editor, Router Mode, and SD Card Backups

You never have to edit YAML or recompile firmware just to rearrange a tile. Every Simple Open Camper panel serves a gzip-compressed browser editor at http://<panel>/ (protected by a password you set on first login, default panelsat). From a phone or laptop you can drag and drop tiles across multiple pages, upload custom floor-plan backgrounds, assign icons and names, configure sensors, enable on-demand debug logs, and push Wi-Fi OTA firmware updates.

When you are parked far from home Wi-Fi, switching the panel to Router Mode creates its own 2.4 GHz Wi-Fi access point (defaulting to channel 13 to stay clear of Zigbee channel 11) so your SMHUB Nano, Shelly relays, and phone editor work anywhere. All layouts, sensor configs, logos, and backgrounds can be backed up directly to a microSD card.

Simple Open Camper Versus the Alternatives

Area Simple Open Camper (S.O.C.) Home Assistant + Wall Tablet Victron Cerbo GX + GX Touch VanPI (Pekaway)
Power Consumption Very low (~1-3 W on ESP32 panel) Moderate to high (Pi/mini PC + router + tablet) Low (~2-4 W dedicated Linux) Moderate (Raspberry Pi 4/5)
Cloud / Accounts None, 100% local Optional (can be local) Optional (VRM portal) Optional (local-first)
Hardware Cost Low (~$30-$70 ESP32 touch panel) Medium-high (Pi + SSD + tablet + case) High ($400+ Cerbo + GX Touch) Medium-high (Pi + relay/dimmer HATs)
Native Camper Protocols Zigbee2MQTT, Victron BLE/MQTT, 10+ BMS, Truma/Alde LIN, Mopeka, diesel heaters Requires custom HACS integrations & add-ons Best-in-class Victron, limited cabin lights/heaters Strong camper relays, heaters, Ruuvi, Victron
Configuration UX Built-in drag-and-drop web editor Rich Lovelace dashboards (steeper learning curve) Polished fixed Victron UI Node-RED + web dashboard
Licence PolyForm Noncommercial 1.0.0 (free for personal DIY) Apache 2.0 (open source) Open source Venus OS (proprietary hardware) Open source / commercial kits
Maturity Active Beta (v0.2.6, some modules untested on hardware) Mature industry standard Mature OEM marine/RV standard Mature DIY camper ecosystem

Honest Limits and Licensing Notes

Two important realities deserve clear attention before you order parts:

  1. Beta Status on Untested Modules: While the developer runs the panel daily with Zigbee2MQTT (131 devices, 73 tiles), the README transparently flags several modules written from open protocol specifications that have not yet been verified on physical hardware – including real Mopeka sensors, Truma CP Plus/iNet X, Alde, WLED, Cerbo GX, Senso4s, SuperSense, Simarine STRx, Ruuvi, SwitchBot, CS-BATTERIES, and many BMS/power station models. Expect to turn on the built-in browser debug log and share captures on GitHub if you are the first tester for a specific heater or BMS.
  2. Non-Commercial Licence: Simple Open Camper is released under the PolyForm Noncommercial License 1.0.0. It is completely free to download, modify, and run in your own personal campervan or off-grid shack, but selling pre-flashed panels, commercial installation services, or bundling the firmware into a paid product requires a separate commercial licence from the author.

Flashing in Minutes From Your Browser

You don’t need to install VS Code or PlatformIO to try Simple Open Camper. The project provides a hosted Online Web Flasher (works in Chrome or Edge via WebSerial) covering both the main panels (CrowPanel Advanced 7" ESP32-P4, Waveshare 7" 7B, CrowPanel 1.46" Round) and companion satellites/accessories.

Simple Open Camper browser WebSerial flasher showing firmware v0.2.6 buttons for CrowPanel Advanced 7 inch ESP32-P4, Waveshare 7 inch 7B, and CrowPanel 1.46 inch round
The browser WebSerial flasher at cyclemat.github.io/simple-open-camper/flasher/ lets you flash a clean install or keep existing settings during updates with zero toolchain setup. Screenshot by 9M2PJU.
  1. Pick your panel: Choose the Elecrow CrowPanel Advanced 7″ (ESP32-P4) if you want maximum headroom and a built-in MQTT broker, or the Waveshare 7B (ESP32-S3) for a lower-cost selective build.
  2. Flash over USB-C: Plug into the board’s UART USB-C port, open the Simple Open Camper Online Flasher in Chrome or Edge, and click Complete (set up anew) for a fresh board (or Firmware only for later updates).
  3. Complete First-Boot Setup: Walk through the on-screen wizard to join your van’s Wi-Fi or enable standalone Router Mode.
  4. Open the Built-In Editor: Browse to http://<panel-ip>/ (or http://192.168.4.1/ in Router Mode), change the default panelsat password, and drag your Zigbee, Victron, BMS, and sensor tiles onto your pages.
  5. Compile Custom Builds (Optional): If you want to change the panel language (lang = en in platformio.ini) or trim modules for the Waveshare ESP32-S3, clone the repo in VS Code with PlatformIO and run pio run -e crowpanel-p4 or pio run -e waveshare-7b.

Sources and Further Reading

73 de 9M2PJU.

Post Comment